H3C Technologies H3C SR8800 User Manual
Page 71
61
GigabitEthernet3/1/1 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C
Ordering Name : SFP-GE-SX-MM850
Table 23 Command output
Field Description
Connector Type
Type of the connectors of the transceiver module:
•
Optical connectors, including SC (SC connector, developed by NTT) and LC
(LC connector, 1.25 mm/RJ-45 optical connector developed by Lucent).
•
Other connectors, including RJ-45 and CX 4.
Wavelength(nm)
•
Optical transceiver module—Central wavelength of the laser sent, in nm. If the
transceiver module, for example, 10GBASE-LX4, supports multiple
wavelengths, every two wavelength values are separated by a comma.
•
Electrical transceiver module—Displayed as N/A.
Transfer distance(xx)
Transfer distance, where xx represents km for single-mode transceiver modules
and m for other transceiver modules. If the transceiver module supports multiple
transfer medium, every two values of the transfer distance are separated by a
comma. The corresponding transfer medium is included in the bracket following
the transfer distance value. The following are the transfer media:
•
9 um—9/125 um single-mode fiber.
•
50 um—50/125 um multi-mode fiber.
•
62.5 um—62.5/125 um multi-mode fiber.
•
TP—Twisted pair.
•
CX4—CX4 cable.
Digital Diagnostic
Monitoring
Whether the digital diagnosis function is supported:
•
YES—Supported.
•
NO—Not supported.
Vendor Name
Name of the vendor who manufactures or customizes the transceiver module.
Ordering Name
Transceiver module model.
# Display part of the electrical label data for the transceiver module plugged in interface GigabitEthernet
3/1/1.
GigabitEthernet3/1/1 transceiver manufacture information:
Manu. Serial Number : XXXXXXXXXXXXXXXXXX
Manufacturing Date : 2008-09-01
Vendor Name : H3C
Table 24 Command output
Field Description
Manu. Serial Number
Serial number of the transceiver module.