H3C Technologies H3C SR8800 - Manual (Page 121)

111
Figure 74 Affixing a label
Figure 75 shows the affixed labels when the cable is laid vertically and horizontally.
Figure 75 Affixed labels
Affixing a label to a power cord
Stick the label to the recessed rectangular area on the identification plate. You can stick the label to either
side of the identification plate. Be sure to affix the labels on the same side of the identification plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other positions
as needed. Figure 74 shows how to affix a label when a cable is laid horizontally.
TO:
B02 03 12