Enabling arp logging, Displaying and maintaining arp – H3C Technologies H3C S12500-X Series Switches User Manual

Page 21

Text mode
Original mode

[Switch-vlan-interface10] ip address 192.168.1.2 24

[Switch-vlan-interface10] quit

# Configure a multiport unicast MAC address entry that has MAC address 00e0-fc01-0000, and output
interfaces Ten-GigabitEthernet1/0/1, Ten-GigabitEthernet1/0/2, and Ten-GigabitEthernet1/0/3 in

VLAN 10.

[Switch] mac-address multiport 00e0-fc01-0000 interface Ten-GigabitEthernet1/0/1 to

Ten-GigabitEthernet1/0/3 vlan 10

# Configure a multiport ARP entry with IP address 192.168.1.1 and MAC address 00e0-fc01-0000.

[Switch] arp multiport 192.168.1.1 00e0-fc01-0000 10

# Display ARP information.

[Switch] display arp

Type: S-Static D-Dynamic O-Openflow M-Multiport I-Invalid

IP address MAC address VLAN Interface Aging Type

192.168.1.1 00e0-fc01-0000 10 N/A N/A M

This manual is related to the following products:

H3C S9800 Series Switches H3C S6800 Series Switches H3C S3100V2 Series Switches