H3C Technologies H3C S12500 Series Switches - Manual (Page 83)

70
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Required.
Configure the switch to
operate in PVST mode.
Configuring the root bridge or a secondary root
bridge
Optional.
Configuring the switch priority Optional.
Configuring the network diameter of a switched
network
Optional.
Configuring spanning tree timers Optional.
Configuring the timeout factor Optional.
Configuring the maximum port rate Optional.
Configuring edge ports Optional.
Configuring the port link type Optional.
Enabling the spanning tree feature Required.
Configuring the leaf
nodes
Setting the spanning tree mode
Required.
Configure the switch to
operate in PVST mode.
Configuring the switch priority Optional.
Configuring the timeout factor Optional.
Configuring the maximum port rate Optional.
Configuring edge ports Optional.
Configuring path costs of ports Optional.
Configuring the port priority Optional.
Configuring the port link type Optional.
Enabling the spanning tree feature Required.
Performing mCheck Optional.
Configuring the VLAN Ignore feature Optional.
Configuring TC snooping Optional.
Configuring protection functions Optional.
MSTP configuration task list
Complete the following tasks to configure MSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Optional.
By default, the switch
operates in MSTP mode.