H3C Technologies H3C S12500 Series Switches - Manual (Page 237)

224
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter Ethernet interface view or
port group view.
• Enter Layer 2 or Layer 3 Ethernet
interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use either command.
3. Enable LLDP polling and set the
polling interval.
lldp check-change-interval interval
By default, LLDP polling is
disabled.
Configuring the advertisable TLVs
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter Ethernet interface view or
port group view.
• Enter Layer 2 or Layer 3 Ethernet
interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual port-group-name
Use either command.
3. Configure the advertisable TLVs
(Layer 2 Ethernet interface view
or port group view).
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] } | dot3-tlv { all |
link-aggregation | mac-physic |
max-frame-size | power } | med-tlv { all
| capability | inventory | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> |
elin-address tel-number } |
network-policy | power-over-ethernet } }
Optional.
By default, all types of
LLDP TLVs except location
identification TLVs are
advertisable on a Layer 2
Ethernet port.
4. Configure the advertisable TLVs
(Layer 3 Ethernet interface
view).
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name } |
dot3-tlv { all | link-aggregation |
mac-physic | max-frame-size | power } |
med-tlv { all | capability | inventory |
location-id { civic-address device-type
country-code { ca-type ca-value }&<1-10>
| elin-address tel-number } |
power-over-ethernet } }
Optional.
By default, all types of
LLDP TLVs, except IEEE
802.1 organizationally
specific TLVs, network
policy TLVs, and location
identification TLVs, are
advertisable on a Layer 3
Ethernet port.