H3C Technologies H3C S12500 Series Switches - Manual (Page 265)

252
Compliance-GVRP : False
----[GigabitEthernet3/0/1] ----
Config Status : Enabled
Running Status : Enabled
Join Timer : 20 (centiseconds)
Leave Timer : 60 (centiseconds)
Periodic Timer : 100 (centiseconds)
LeaveAll Timer : 1000 (centiseconds)
Registration Type : Fixed
Local VLANs :
1(default), 2,
The output shows that the local VLAN information on GigabitEthernet 3/0/1 is the same that that
before the MVRP registration mode is set to fixed.
5. Delete VLAN 2 on Device A:
# Delete VLAN 2 on Device A.
[DeviceA] undo vlan 2
# Check the local VLAN information on GigabitEthernet 3/0/1 of Device B.
[DeviceB] display mvrp running-status
-------[MVRP Global Info]-------
Global Status : Enabled
Compliance-GVRP : False
----[GigabitEthernet3/0/1] ----
Config Status : Enabled
Running Status : Enabled
Join Timer : 20 (centiseconds)
Leave Timer : 60 (centiseconds)
Periodic Timer : 100 (centiseconds)
LeaveAll Timer : 1000 (centiseconds)
Registration Type : Fixed
Local VLANs :
1(default), 2,
The output shows that the dynamic VLAN information on GigabitEthernet 3/0/1 does not change
after VLAN 2 is deleted from Device A.
Configuration example for MVRP in forbidden registration
mode
Network requirements
As shown in Figure 89 , enable MVRP and set the MVRP registration mode to forbidden on
GigabitEthernet 3/0/1 of Device B, so that Device B does not learn dynamic VLANs.