Ensemble Designs 7555 HD / SD Video Processing Frame Synchronizer - Manual (Page 49)

www.ensembledesigns.com Avenue 7555, 9550, 9550-XA - Page 49
7555 HD/SD, 9550 3G/HD/SD, and 9550-XA 3G/HD/SD Video Processing Frame Synchronizers
In 1:4 Avenue Touch Screen Menu showing channels 5/6 from the
decoded signal going to mixer input channels 1/2, while channels 7/8
from the SDI signal are going to mixer input channels 3/4.
Using the In 1:4, In 5:8, In 9:12, In 13:16 Menus for In-line Processing (Cont’d)
Routing the Decoded Signal to the Mixer (Applicable Only When Decoding)
When decoding, you will route the decoded signal to specific mixer input channels. This process
involves choosing output channels of the decoder as inputs to the mixer.
To Send a Decoded Signal to Mixer Channels 1/2
1. From the 1/2 Input control, select Decode from the left drop-down menu.
2. From the corresponding right drop-down menu, select the pair of output channels from the
decoder that you want to send to mixer input channels 1/2.
In the example shown below, channels 5/6 from the decoder are being sent to mixer input channels
1/2. In contrast, channels 7/8 from the SDI signal (rather than from the decoder) are being sent to
mixer input channels 3/4. In this case, only two channels are being directed from the decoder to the
mixer.