Automatic gain control (agc) (optional) – Ensemble Designs 7555 HD / SD Video Processing Frame Synchronizer User Manual
Page 43
www.ensembledesigns.com
Avenue 7555, 9550, 9550-XA - Page 43
7555 HD/SD, 9550 3G/HD/SD, and 9550-XA 3G/HD/SD Video Processing Frame Synchronizers
Automatic Gain Control (AGC) (Optional)
For any mixer channel, you can enable AGC by selecting the AGC Enabled box. When enabled, the AGC
Enabled box displays green. Note, however, that the AGC Enabled control will have no effect unless
AGC is first engaged. To turn on the AGC function, select Auto from the AGC Master control in the Aud
AGC menu (page 37).
Configuring Audio Output (9615 Software Key Option Required)
From the output of the mixer, you can send digital audio out through the 4 AES connectors (6 AES
connectors for the 9550-XA module). Analog audio goes out through the 15-pin D connector. The
digital and analog audio paths may be used simultaneously. You may also re-embed the audio.
Configuring Digital Audio Outputs (9615 Software Key Option Required)
Use the Out Bus Assign controls from the Mix 1:4, Mix 5:8, Mix 9:12 and Mix 13:16 menus to route
mixer inputs to mixer outputs. For digital audio, mixer output pair 1/2 feeds SDI out 1/2 and/or AES out
1/2. Mixer output pair 3/4 feeds SDI out 3/4 and/or AES out 3/4, and so on.
Note:
If an AES connector is selected as an input, it cannot simultaneously be used as an
output.