Frame slot placement – Ensemble Designs 7555 HD / SD Video Processing Frame Synchronizer User Manual
Page 11
www.ensembledesigns.com
Avenue 7555, 9550, 9550-XA - Page 11
7555 HD/SD, 9550 3G/HD/SD, and 9550-XA 3G/HD/SD Video Processing Frame Synchronizers
Frame Slot Placement
Plug the 7555, 9550 or 9550-XA module into any one of the slots (except slot 1) in the 3RU frame or
any slot (except slot 3) in the 1RU frame. Install the plastic overlay provided onto the corresponding
group of rear BNC connectors associated with the module location. Note that the plastic overlay
has an optional adhesive backing for securing it to the frame. Use of the adhesive backing is only
necessary if you would like the location to be permanent and is not recommended if you need to
change module locations. This module may be hot-swapped (inserted or removed) without powering
down or disturbing performance of the other modules in the system.
Note:
We recommend installing the 7555, 9550 or 9550-XA in slots 2 through 10 rather
than slot 1 for the 3RU frame.