Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 24)

APR175P USER’S GUIDE
23
ACCESS POINT MODE BASIC SETUP
Connect the Access Point to your Router/Network:
a) Attach the antennas to the Access Point.
b) Plug in the Power Adapter.
c) Using the included RJ-45 Ethernet cable, attach one end to the Access Point’s
LAN 1/WAN port and
the other to your router’s network port (or any available port on a network switch).
d) Connect an Ethernet cable between the Access Point’s LAN2 port and your computer’s network port
or connect to the Access Point’s Wi-Fi Network: Amped_APR_2.4 or Amped_APR_5.0 , Password:
wireless.