Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 166)

APR175P USER’S GUIDE
165 165
Troubleshooting: Access Point Controller Issues
I cannot access the Wi-Fi networks of the Access Point Controller. (Not the Wi-Fi networks of the Managed
Access Points).
a. The “Local AP Wi-Fi” settings for the AP Controller may be disabled.
b. While in AP Controller mode, select Local AP Wi-Fi from the top navigation menu, then select 2.4GHz
or 5.0GHz Wi-Fi Settings > Basic Settings from the left side menu. Enable the Wi-Fi Radio.
I cannot detect any Managed Access Points or do not see any Managed Access Points in my Managed AP
Overview.
a. Check that all Managed Access Points are powered on.
b. Check that all Managed Access Points are set to “Managed Access Point” operational modes. If they are
not please do so from the Web Menu for each Access Point.
c. Check that all Managed Access Points are set to “Managed Access Point” operational modes. If they are
not please do so from the Web Menu for each Access Point.
d. Check that all Managed Access Points are connected to the same physical network as the Access Point
Controller. If your Access Points are on different networks or if there is a firewall or network protocols