AML M7220 Wireless Terminal User Manual

Page 70

2-44

USER’S GUIDE

M7220 Wireless Hand-held Terminal

VTxxx ENQ Answerback Macros

Audio Setup

Startup Options

Section

Setting Parameter

First octet of unit's IP address

Second octet of unit's IP Address

Third octet of unit's IP Address

Fourth octet of unit's IP Address

Back slash character

First hex encoded byte of unit's MAC address

Second hex encoded byte of unit's MAC address

Third hex encoded byte of unit's MAC address

Fourth hex encoded byte of unit's MAC address

Fifth hex encoded byte of unit's MAC address

Sixth hex encoded byte of unit's MAC address

Unit's serial number

Setting Parameter

Available Options

Option Description

System Sound

Key Ticks

Enabled/Disabled

1.) Disabled

2.) Short

3.) Long

Enable/Disable the global system sound

Do not emit a beep/tick on keyboard entry

Emit a high-pitched, short tick on a keyboard button press

Emit a lower-pitched, longer tick on a keyboard button press

Setting Parameter

Available Options

Option Description

TELNET Srvr

SSH Server

FTP Server

HTTP Server

Barcode Mon

Enable the embedded TELNET server on boot
** Usr: root, ** Pwd: aml

Enable the embedded SSH / SFTP server on boot
** Usr: root, ** Pwd: aml

Enable the FTP server on boot
** Usr: root, ** Pwd: aml

Enabled the embedded Web server on boot
If the “Setup Password” is set, it will be used as the pass-
word to log in to the embedded web server. Otherwise, the
password defaults to “aml”

Enable the standard bar code scanner monitoring service
Unless developing custom applications for the M7220, this
should be enabled

Enabled/Disabled