AML M7220 Wireless Terminal - Manual (Page 58)

2-32
USER’S GUIDE M7220 Wireless Hand-held Terminal
2-Dimensional Imager Symbology Settings - cont’d.
Type Setting Parameter Available Options Option Description
LInear (cont’d)
Symbology
Codabar
(cont’d)
MSI/Plessy
GS1 (RSS)
Telepen
Min Length
Max Length
MSI
MSI Check Digit
MSI Min Length
MSI Max Length
Plessy
Plessy Min Len
Plessy Max Len
GS1 Databar
GS1 Limited
GS1 Expanded
Expanded Min
Expanded Max
Telepen
Telepen Output
Min Length
Max Length
Min: 0 characters
Max: 60 characters
Min: 0 characters
Max: 60 characters
Enabled/Disabled
1.) Don't TX
2.) Transmit
Min: 0 characters
Max: 48 characters
Min: 0 characters
Max: 48 characters
Enabled/Disabled
Min: 0 characters
Max: 48 characters
Min: 0 characters
Max: 48 characters
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Min: 0 characters
Max: 74 characters
Min: 0 characters
Max: 74 characters
Enabled/Disabled
1.) AIM Output
2.) Original
Min: 0 characters
Max: 60 characters
Min: 0 characters
Max: 60 characters
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of MSI
symbols
Do not transmit the check character
Transmit the check character
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Plessy
symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of GS1
Databar (14) symbols
Enable/Disable decoding of GS1
Limited symbols
Enable/Disable decoding of GS1
Expanded symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Telepen
symbols
Decode as standard full ASCII
Decode as compressed numeric
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read