AML M7220 Wireless Terminal - Manual (Page 56)

2-30
USER’S GUIDE M7220 Wireless Hand-held Terminal
2-Dimensional Imager Symbology Settings - cont’d.
Type Setting Parameter Available Options Option Description
LInear (cont’d)
Symbology
Code 39
Code 93
Code 11
Code 39
Start/Stop
Check Digit
Min Length
Max Length
Append Mode
Code 32
Full ASCII
Code 93
Min Length
Max Length
Code 11
Check Digit
Min Length
Max Length
Enabled/Disabled
1.) Skip
2.) Transmit
1.) Ignore
2.) Verify
3.) Transmit
Min: 0 characters
Max: 48 characters
Min: 0 characters
Max: 48 characters
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Min: 0 characters
Max: 80 characters
Min: 0 characters
Max: 80 characters
Enabled/Disabled
1.) Single
2.) Double
Min: 0 characters
Max: 80 characters
Min: 0 characters
Max: 80 characters
Enable/Disable decoding of Code 39
symbols
Do not transmit start and stop
characters
Transmit the start and stop characters
Ignore Code 39 check digits
Verify but do not transmit Code 39
check digits
Verify and transmit Code 39 check
digits
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Allow Code 39 multiple bar code
concatenation
Enable/Disable conversion of data
into Code 32 (Italian Pharmacode)
Enable/Disable full ASCII support for
Code 39
Enable/Disable decoding of Code 93
symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Code 11
symbols
One check digit verification
Two check digit verification
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read