AML M7220 Wireless Terminal - Manual (Page 57)

2-31
USER’S GUIDE M7220 Wireless Hand-held Terminal
2-Dimensional Imager Symbology Settings - cont’d.
Type Setting Parameter Available Options Option Description
LInear (cont’d)
Symbology
2 of 5
Codabar
Interleaved
Check Digit
Interleaved Min
Interleaved Max
Industrial
Industrial Min
Industrial Max
IATA
IATA Min
IATA Max
Matrix
Matrix Min
Matrix Max
Codabar
Start/Stop
Check Digit
Concatenate
Enabled/Disabled
1.) Ignore
2.) Verify
3.) Transmit
Min: 0 characters
Max: 80 characters
Min: 0 characters
Max: 80 characters
Enabled/Disabled
Min: 0 characters
Max: 48 characters
Min: 0 characters
Max: 48 characters
Enabled/Disabled
Min: 0 characters
Max: 48 characters
Min: 0 characters
Max: 48 characters
Enabled/Disabled
Min: 0 characters
Max: 80 characters
Min: 0 characters
Max: 80 characters
Enabled/Disabled
1.) Skip
2.) Transmit
1.) Ignore
2.) Verify
3.) Transmit
1.) Off
2.) On
3.) Required
Enable/Disable decoding of Inter-
leaved 2 of 5 symbols
Ignore check digits
Verify but do not transmit check digits
Verify and transmit check digits
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Indus-
trial 2 of 5 symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of IATA 2
of 5 symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Matrix 2
of 5 symbols
Minimum length in characters to
allow a good read
Maximum length in characters to
allow a good read
Enable/Disable decoding of Coda-
bar symbols
Do not transmit start and stop
characters
Transmit start and stop characters
Ignore check digits
Verify but do not transmit check digits
Verify and transmit check digits
Do not allow Codabar concatenation
Allow concatenation
Require symbols to be concatenated