AML Phoenix Mini-Kiosk - Manual

Scan Engine
Optional 24-48V DC
Speaker
Etnernet (POE)
External USB
+12V DC
RS-232
Debug/RS-232
Internal USB
External USB
HID
USB Slave
Radio/USB Micro SD Card
I/O
Mini-Kiosk Quick-Start Guide
Getting Started Getting Started Getting Started
Front View Side and Bottom View
800.648.4452
www.amltd.com
05152015
Connections to the Phoenix unit are
housed internally to prevent vandalism
and to secure devices.
The Phoenix can utilize three power
sources: external DC power supply,
Power-over-Ethernet, and an optional
internal backup battery.
External DC Power Supply
WARNING: Using power supplies that are not supplied
by AML for use with the Phoenix unit can cause
damage to the unit and will void all warranties.
Internal Power-over-Ethernet Supply
The Phoenix contains an 802.3af compatible power
supply. The unit can be powered via category 5
networking cable when used with an 802.3af
compatible power injector. Both network traffic and
power can be sent via the same category 5 wire.
1) Remove
Screws
2) Rotate Up
Slightly
3) Slide Off
Tabs
1
Open Outer Case
2
Internal Connections
3
Power Requirements
Wiring Installation