beautypg.com

Alinco DJ-S17 User Manual

Page 43

background image

8.Set Mode

8

43

1. Press the FUNC key for at least 2 seconds.

The unit enters the Set mode.

"BS-ON" is displayed as a factory-default.

2. Press the MONI key or FUNC key to select a menu.

The Monitor function can't be used in this status.

3. Rotate the dial to change the parameter.

4. Press any key other than the MONI key and FUNC key to complete the settings, or

use the MONI or FUNC keys to continue programming.

The last operated menu will be selected the next time you enter the Set mode.

8.3.1 Menu 1 Battery Save (BS) Function

This function prevents useless battery consumption by switching the power ON/OFF

at a fixed ratio if there is no key operation or receiving signal for a continuous period

of 5 seconds or more.

1. BS-ON is displayed on the LCD.

2. Rotate the dial to select the battery save setting (on or off).

• The factory setting is BS-ON

• The Battery Save function is temporarily suspended when a key is operated or a

signal is received.

• Set this parameter OFF for packet operation.

• The display remain unchanged even the BS function is in the OFF cycle.

8.3.2 Menu 2 Timer/Busy Scan Setting

Select the scan-resume condition in this menu (page 32).

1. TIMER is displayed on the LCD.

2. Rotate the dial to select the scan-resume condition between TIMER and BUSY.

Available Parameters

8.3

Entering the Set Mode

8.2

This manual is related to the following products: