Alinco DJ-S17 - Manual (Page 41)

7.Special Functions
7
41
1. In the VFO/Memory/Call channel mode, select the channel to which you wish to
apply the Repeater-Access setting.
2. Press the FUNC key, and while is displayed on the LCD, press the key.
The Repeater-Access setting is applied to the operating frequency.
NOTE:
Preset parameters on the Repeater-Access function memory will be effective at
any frequency. Repeater-Access parameters have priorities over the parameters
programmed in the VFO/memory/CALL modes.
Repeater-Access 7.3
Caution
• The time to refresh totally depends on the remaining charge of the battery
pack. To discharge the fully-charged EBP-65 may take up to approx. 7 hours.
• When this function is on, the backlight and the keys are illuminated, and
noise from the speaker can be heard.
• Before storing the rechargeable battery pack for an extended period of
time, please full-charge it after this operation. Also, refresh and fully charge
the battery once every 6 months to keep the pack in good condition.