Alinco DJ-S40 - Manual (Page 36)

32
8. Cloning
8. Cloning
8-1 Cloning
When using the cloning function, all setting information (including memory
data) of one transceiver (master unit) can be transferred and copied to another
transceiver (slave unit) by connecting them with a cable.
■ Connecting the Transceivers
Connect the external speaker jacks on both the master and slave transceivers
with a commercially available Ø3.5 stereo mini plug cable.
After connecting them, switch the both units' power ON.
Caution: Connect the cable ONLY while the transceiver power is OFF.
To SP jack on the
transceiver
Master
Ø3.5 stereo mini plug cable
To SP jack on the
transceiver
Slave