Alinco DJ-S40 - Manual (Page 18)

14
3. Basic Operations
3-5 CALL Mode
The Call mode is used when you are receiving or transmitting on the CALL
channel. The transceiver has one CALL channel.
The default setting is 434,000MHz.
3-5-1 Selecting the CALL Channel
1. Press the FUNC key and then press the
CALL key while the "F" icon appears.
"C" appears on the display when the
CALL channel is selected.
2. Press the V/M key to return to the VFO
mode or the Memory mode.
3-5-2 Programming a CALL Channel
The CALL channel is one of the memory channels where the frequency and
other settings can be programmed by selecting the memory channel "C" in the
VFO mode (page 12).
Caution: • Scanning cannot be performed when the transceiver is in the
CALL mode.
• In the CALL mode, frequency or memory No. cannot be
changed by pressing the up/down keys.
Caution: The CALL channel can be programmed but cannot be cleared.