Alinco DJ-S40 - Manual (Page 14)

10
3. Basic Operations
3. Basic Operations
3-1 Turning the Power ON
Hold the POWER switch down for a
second to turn the power ON. To turn the
power OFF, hold the power switch down
again for 2 seconds.
3-2 Adjusting the Audio Volume
To increase: Rotate the volume dial
clockwise.
To decrease: Rotate the volume dial
counter-clockwise.
When a voice cannot be heard due to the
squelch setting, press and hold the MONI
key and adjust the volume to the level you
desire.
3-3 VFO Mode
The factory default setting for the
transceiver is the VFO mode.
3-3-1 Frequency Setting
W h e n
▼ / ▲ k e y s a r e p r e s s e d ,
frequency increases and decreases in
accord with the selected tuning step.
Reference: Squelch level can be adjusted in the Setting mode (page 17).
VFO mode
Audio volume
decreases
Volume dial
Audio volume
increases
Power switch