Alinco DJ-S40 - Manual (Page 17)

13
3. Basic Operations
3-4-3 Clearing a Memory Channel
1. Press the FUNC key and then press the V/M key while "F" icon appears.
Memory channel No. lights and "W" blinks on the display.
2. Select a memory channel you wish to clear by pressing the
▲/▼ keys.
On a programmed channel, the "memory channel No." is displayed steadily
(without blinking).
3. Press the FUNC key again and then press the MW key while the "F" icon
appears.
A beep is heard and the pre-set frequency is cleared.
3-4-4 Contents of Memory Programming
The following information can be stored in each memory channel 1 - 99, SC
and the CALL channel.
• Frequency
• Offset Frequency
• Shift Direction
• Tone Frequency
• Tone Encoder / Decoder Settings
• Skip CH Setting
• Busy Channel Lock Out (BCLO)