Alinco DJ-S40 - Manual (Page 15)

11
3. Basic Operations
3-4 Memory Mode
The Memory mode is used to recall a previously programmed frequency. This
transceiver has 99 memory channels (1-99CH), 1 call channel (C), and 1 alarm
channel (SC).
3-4-1 Selecting a Memory Channel
1. Press the V/M key to activate the
Memory mode.
Pressing the V/M key alternates the
transceiver between VFO/Memory
modes.
When in Memory mode, the memory
channel No. appears on the display.
The Memory mode cannot be
activated if there is no pre-set
program recorded in the memory
channels.
By pressing the
▲/▼ keys, the
memory No. increases (or decreases)
by one memory each time the key is
pressed.
Memory channel No.
Memory mode