Alinco DJ-S40 - Manual (Page 27)

23
5. Advanced Operations
5-1-1 VFO Scan
Scans the entire band in the VFO mode.
1. Press the V/M key to activate the
VFO mode.
2. Press and hold the
▲/▼ keys for 1
to 2 seconds to start scanning.
The decimal point blinks during
scanning.
Scanning direction goes upward by
pressing the
▲ key, and downward
by pressing the
▼ key.
3. To stop scanning, press the PTT key,
the FUNC key or the V/M key.
When the MONI key is pressed,
scanning stops temporarily and the
monitor function is activated. When
the key is released, scanning resumes.
5-1-2 Memory Scan
Scans only the programmed memory
channels.
1. Press the V/M key to activate the
Memory mode.
2. Press and hold the
▲/▼ keys for
1 to 2 seconds to start scanning.
The decimal point blinks during the
scan.
The operation is the same as with the
VFO scan.
VFO Mode
Memory No.
Memory Mode