Alinco DJ-S40 - Manual (Page 13)

9
2. Control Functions
2-3 Display
Appears when the FUNC key is pressed.
Indicates the shift (-/+) direction.
Appears when a tone frequency is encoded and added to transmitted signal.
Appears when the tone squelch is set.
Blinks during memory writing mode.
Appears on Memory scan skip channel(s).
Appears when the Bell Function is on.
Appears when the charge level is low.
Appears when the Mosquito Repellent Signal (MRS) is ON.
Indicates memory No. in the Memory mode and setting No.
in the Setting mode.
Appears when keys are locked.
Indicates the frequency and various setting status.
Appears when the Theft Alarm is ON.
Divides MHz and kHz of the frequency. Blinks during scanning operation.
Appears when the squelch is unmuted.
Indicates the receiving level and the transmission output.
No. Indication Display