Alinco DJ-S40 - Manual (Page 19)

15
3. Basic Operations
3-6 Receiving
1. Turn the power ON.
2. Rotate the volume dial to set the audio
volume.
3. Eliminate noise by setting the squelch in
the setting mode (page 17).
4. Select the desired frequency.
When a signal is received on the selected
frequency, "B" appears on the display and
the received signal is heard. The S meter
indicates the relative signal strength.
Reference: Be sure to use the transceiver in the state where the antenna
is set straight up to the upper part of the transceiver.
3-6-1 Monitor Function
• While the MONI key is pressed, the squelch is unmuted and sound is heard from the
speaker regardless of the squelch setting. "B" appears on the display.
• By using this function, weak signals under the squelch threshold level can be heard.
• Monitoring the selected frequency can be done even when the tone squelch is set.
S meter