Alinco DJ-S40 - Manual (Page 23)

19
4. Parameter Setting Mode
Please cut out or copy this Mode Settings Chart for your convenience.
Mode Settings Chart
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
Battery char
ging ON/OFF
Squelch level setting T
uning step setting
Shift direction setting Of
fset frequency setting
Beeper ON/OFF Call tone setting T
O
T
setting (seconds
APO setting
minutes
Battery saving ON/OFF Bell ON/OFF Stand-by-beep ON/OFF BCLO ON/OFF Scan (timed/ busy channel
switching
Scan skip setting Battery type setting Theft alarm ON/OFF Mosquito repellent signal ON/OFF External terminal control ON/OFF
CHG-oF
Sql-07
StP-1250
SFd-oF
0.600
bEP-on
Alt
to-oFF
AP-oFF
bS-on
bEL-oF
Stb-on
bCL-oF
StYP-t
m**-oF
bAt-2
SCr
-oF
mrS-oF EPo-oF
01 CHG-oF Battery charging ON/OFF
When ON is set, the battery pack can be charged by EDC-92/93.
The battery icon appears and blinks on the LC while charging.
Turn the power OFF while charging (Do not charge dry cell batteries!).
02 Sql-07 Squelch level setting
Mutes noise when no signals are being received.
This level is set (01/20).
03 StP-1250 Tuning step setting
Frequency steps can be changed in VFO mode (5/10/12.5/15/20/25/30/50).
04 SFd-oF Shift direction setting
Shift direction is set when transmitting (OFF/-/+).
"-" or "+" appears on the LCD when this feature is active.
05 0.600 Offset frequency setting
Value by which the frequency is offset when Shift is active (MHz).
06 bEP-on Beeper ON/OFF
Beeper is set ON/OFF.