Alinco DJ-S40 - Manual (Page 33)

29
7.Special Functions
2. Select "SCr-on" in the Setting
mode.
"
✽" appears on the display.
3. Turn OFF the power switch of the
transceiver.
Alarm setting will then turn ON.
4. To cancel the alarm setting, turn the
power ON, and select "SCr-oF" in
the Setting mode.
7-1-1 Connecting and Setting
1. Insert the plug of the alarm cable into the speaker terminal jack.
Caution • Position the alarm cable and transceiver firmly so that it will
not be easily detached.
• Program the CH-SC (for alarm) memory in advance to
cancel the alarm (page 12).
• Set CH-SC (for alarm) in the state where the squelch is
activated.
Caution • When setting the theft alarm function, connect the alarm cable
before turning the power OFF.
• The alarm may start sounding if the plug is inserted after
turning the power OFF.