Alinco DJ-S40 - Manual (Page 16)

12
3. Basic Operations
3-4-2 Memory Channel
Programming
1. Return to the VFO mode by pressing
the V/M key.
2. Select the desired frequency you wish
to save to Memory.
3. Press the FUNC key and then press the
V/M key while the "F" icon appears.
The memory channel No. and "W"
blinks.
VFO mode
Caution:
• Please be sure to set the frequency for alarms in CH-SC (the channel for
alarms) (Page 29).
• Selecting and programming again overwrites a programmed memory
channel.
• The CALL channel can also be overwritten but the CALL channel cannot
be cleared.
4. Select a memory channel to program by pressing the
▲/▼ keys.
A blinking memory channel No. indicates that the channel is not
programmed yet.
5. Press the MW key while "W" blinks.
A beep is heard and the selected VFO frequency is programmed to the
memory channel.