Alinco DJ-S40 - Manual (Page 25)

21
4. Parameter Setting Mode
Note
•
There are thousands of kinds of mosquitoes. It may be ineffective against
some of them.
•
The battery save function is not active when MRS setting is on.
19 EPo-oF External terminal control ON/OFF
3.0V is output from the external MIC terminal when the squelch is on (5mA max).
Note: The optional VOX MIC (EME-12/13/15) cannot be used when
EPO is on.
12 Stb-oF Stand-by-beep ON/OFF
When you release the PTT key, a beep sound is transmitted informing your
partner(s) your transmission has ended.
13 bCL-oF BCLO ON/OFF
When active, the ability to transmit is restricted if signals are being received.
When BCLO is on, transmitting is available only in the following cases:
* When no signals are received ("busy" disappears).
* When a tone matches in the TSQ setting.
14 StYP-t Scan (timed/busy channel) switching
Choose between Timed scan and Busy channel scan (TIMER/BUSY).
15 m**-oF Scan skip setting
Memory channel numbers that you want to skip while in Memory Scan are selected
here.
You cannot designate channels to skip if no Memory channels have been saved.
16 bAt-2 Battery type setting
The battery type presently in use is selected and the battery charge level is indicated.
BAT-1: EBP-52N (3.6V) EBP-54N (3.6V) EDH-31 (the dry cell battery)
BAT-2: EBP-53N (6.0V)
17 SCr-oF Theft alarm ON/OFF
Theft alarm function is set (OFF/ON/DELAY).
18 mrS-oF Mosquito repellent signal ON/OFF
An ultrasonic tone, which is disliked by some mosquitoes, is output from the speaker.