ACTi NVR 3 V3.0.09 - Manual (Page 88)

www.acti.com
NVR 3.0 System Administrator’s Manual
88
2. Fill in each of the following fields.
Field Name Description
Server Input the FTP server address. Only alphabets, numbers, and the symbols (.),
(_), (-) are valid
Port Set the FTP port, allowed value is from 1~65535, default is 21.
Account Input the name of the FTP server account. Only alphabets, numbers, and the
symbols (@), (.), (_), (-) are valid.
Password Input the password of the FTP server account. Only alphabets and numbers are
valid.
Mode The FTP works in two very different manners, Active mode and Passive mode.
If your FTP server is behind the firewall or a NAT router, you have to use
“Passive” mode.
Remote Folder Input the upload path of the file. Default will be “/” to represent the root folder.
3. As all necessary information is filled in, click “Test FTP Connection” to test the connection.
If NVR server pops up a “Testing FTP connection was successful” message, NVR
server is ready to upload to this FTP.
4. As the settings are confirmed, click “Apply” to save. The FTP settings here will be default
for every event rule.