ACTi NVR 3 V3.0.09 - Manual (Page 84)

www.acti.com
NVR 3.0 System Administrator’s Manual
84
4. After configuring the actions, click “Apply” to save this response.
5. Go to Setup pageSchedule tab and set the Event Handling schedule for this device.
Event responses will only be triggered when the trigger time falls within either the Event
Handling recording or the Event Handling with Schedule recording period.
Set the DO to become ON or OFF upon
trigger, only the devices supporting DO
functions can be the target devices.
Enable NVR to execute a certain
command upon this event. You can use it
to integrate NVR’s event handling with
other programs. Enter the path of the
command to be executed upon event.
Enable NVR to upload snapshots to a
FTP site upon this event. The default FTP
settings can be set in advance in Setup
pageSystem tabSettings  FTP
Settings. You may set another FTP
destination here for this single event.
Please also make sure the FTP server
setting is correct and the folder access
rights are properly configured.
Enable NVR to send e-mail notification via
SMTP server. The default SMTP and
sender’s e-mail settings can be set in
advance in
Setup page System tabSettings 
E-mail& SMTP Settings.
1. Type one or more recipients ’ e-mail
addresses in “To” column (if more than
one, please separate them by “;”
symbol) or click the icon to select
recipients from existing NVR User list.
The E-mail address should be set in
advance (in Setup pageUsers
tabUsers) for an NVR User so that it
can be selected in this list.
2. Edit the e-mail subject and content.
3. Choose to attach a snapshot or not.
If event trigger type is Video Recovery
or Network Recovery, this function is
disabled.