ACTi NVR 3 V3.0.09 - Manual (Page 54)

www.acti.com
NVR 3.0 System Administrator’s Manual
54
Add Video Streams from a Multi-channel Device
There are devices that output more than one video streams to NVR. For example, a video
encoder converts a number of analog video signals into the same amount of IP video streams;
certain high megapixel cameras such as ACTi KCM-5111, supports outputting multiple VGA
streams cropped from a single high-resolution video source. These multiple streams coming
from a single device are managed as different cameras by NVR server.
To add these streams as multiple channels for you to view and record, please:
1. Select the desired stream mode in “Stream Mode” field on
Setup page Devices tabBasic tab.
2. The “Channel No.” column will display for you to input the
stream ID (the same with your setting in device’s web
configurator).
3. After configuration, click “Apply”.
4. Go to All Devices page, duplicate this device to a new
channel, repeat this step until all the channels you need are
added.
5. Individually modify the Channel No value of the channels.
Target Type
Settings
New Device Existing Device
Basic All
All except Device Name, IP Address, HTTP Port, RTSP
Port, User Name and Password
Video All except Motion Settings, Video Adjustment
PTZ All except PTZ Preset Points and Commands
Note
1. You can only choose either “Add New Device” or existing devices as target.
2. To add new devices by copying from an existing one, the user’s group should be permitted
with this right. To check the access rights, please go to Setup pageUsers pageUser
Groups, select the user group , and enable the “Device Setup” -“Add New Device” under
NVR Permissions.
Settings Copied to Target Devices
Tip
Saving CPU loading with Your Dual Streaming devices
The device supporting dual-streaming function can output two video streams of different value. You
may make the live view stream smaller in size with lesser frame rate to save decoding CPU power
and bandwidth. Meanwhile the recording stream can be larger and have more FPS so that you have
clear images when you need to retrieve evidence. For settings in both streams of devices with dual
stream functionality, please refer to section Configure Video Format on page 55