Add devices on wan or other local area networks, Nvr 3.0 system administrator’s manual – ACTi NVR 3 V3.0.09 User Manual

Page 46

NVR 3.0 System Administrator’s Manual

Add Devices on WAN or Other Local Area Networks

1. After selecting

“Add Device Manually”, the camera settings page will appear as below.

The most important settings are (1) Media Type, (2) Protocol, (3) IP Address, (4) HTTP

Port, and (5) User Name & Password. Please fill in these required fields for NVR to

communicate with the device.

If the device you wish to add supports ONVIF, you can select ONVIF for Media Type, and

the settings page will appear as below. The most important settings are (1) Media Type,

(2) Camera IP, (3) HTTP Port, and (4) User Name & Password. Please fill in these

required fields for NVR to communicate with the device.

Important Notice

1. For certain non-ACTi devices, you may need to configure the ONVIF user credentials of the

camera by accessing its Web Configuration page and managing the ONVIF Users List.

2. Functions supported for devices added through ONVIF are live streaming and adjustments

to video image settings.