Joystick, Joystick configurations – ACTi NVR 3 V3.0.09 User Manual
Page 117
NVR 3.0 System Administrator’s Manual
Joystick
On NVR 3.0, other than user interface PTZ panel and mouse operation, you may also control
the PTZ movements by physical controllers. NVR 3.0 supports two types of controllers, which
both feature in a joystick and twelve buttons for users to assign specific actions.
Model: IP Desktop
Manufacturer: CH Products
Model
: Extreme™ 3D Pro
Manufacturer: Logitech
Joystick Configurations
1.
Log out from NVR server.
2.
Connect the controller device to your computer. To make sure the device is installed
properly, open Windows Start menu and enter Devices and Printers to check the
status.
3.
Log in to NVR server, go to Setup page System tab, enter
“Controller” section and
select your product.
4.
You may assign specific commands from dropdown list to buttons 1~12 of the controller.
When setting is done, click “Apply”. The modification you did on one controller model will
be applied to the other joystick model as well.
5.
To validate its function, go to Live View page and focus on a PTZ device channel to
operate the supported PTZ operations.