Step 10: set default hotspot channel (optional), Step 11: set fisheye camera mode – ACTi NVR 3 V3.0.09 User Manual

Page 106

NVR 3.0 System Administrator’s Manual

Step 10: Set Default Hotspot Channel (Optional)

By system default, the global hotspot channel will always be the top left one. You can set any

other channel on your live view screen to be the default hotspot channel. Right-click on the

channel and select

“Default Hotspot” , then click on View Tool

Bar to save it.

Step 11: Set Fisheye Camera Mode

Define a view for a fisheye camera channel by selecting its mode and using ePTZ control.

Please note that the maximum number of fisheye channels on the same View is 16.

1. On this channel, right-click to bring up channel menu,

click “Fisheye Mode” and select one

mode.

2. After the fisheye mode is selected, click the entire channel or a region of interest.

Use PTZ Panel controls to operate PTZ movements:

Click the mouse anywhere on the view to pan/tilt, scroll the mouse wheel to zoom in/out.

Zoom in

Zoom out

Pan/Tilt

8 directional buttons

Zoom in / Zoom out

ePTZ Controls on PTZ Panel