ACTi NVR 3 V3.0.09 User Manual

Page 20

NVR 3.0 System Administrator’s Manual

When selecting Setup Type, the default

“Complete” will have the program installed on

default C drive, you may

select “Custom” to choose another program location.

3. The IP Port Checker will pop up to confirm the NVR port number with you. The

installation program will use 80 as default. You may enter another available port

number in “Listen Port” field and click “Apply”.

You may just click “Apply” if you are not sure whether this port has been taken or not.

If the port is being used by another service, you will be asked to input another

available port number.