Welltech WG5260 V.6.1 - Manual (Page 89)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 89 -
Chapter 10 Telnet & RS-232 Configuration
WellGate 5260 also can support to be managed by Telnet or Console
port (RS-232) for basic operations.
Interface:
Network: TCP/IP Telnet
RS232:
- Connect using: COM1
- Baud Rate: 9600
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
- Wire: Null modem line (crossed)
Logon WellGate 5260 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal emulator
to login (e.g. telnet 192.168.111.111:10086). User ID & password will be
required for login (default login user id: admin, password: admin & user id:
root, password: root).
Command List:
Command Description
echo Auto echo on or off
Event log Clean or show system log message
exit Quit the current session
Ip config Configure or show network information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time
Reset or show system time.
Time zone Setup or show system time zone
User admin Manage user account.
help & ?
View command list
Echo: auto echo on or not
Command Purpose
[root#]echo ? Usage: echo on/off
Example: echo on
[root#]echo on Echo is on
[root#]echo off Echo is off (default value)
Event log: show system log message
Command Purpose
[root#]event log ? Usage: event log [-clear]
Example: event log
Event log -clear