Welltech WG5260 V.6.1 - Manual (Page 15)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 15 -
Network Configuration
Step 1: After successfully logon to the system, we need to change the
network configuration. Click Control > Network to setup the network
parameters as figure 2.2-1.
Figure 2.2-1
Step 2: Enter the deserved IP address, Submask and default gateway. Apply
the change by clicking apply button as figure 2.2-2.
Figure 2.2-2
Step 3: When screen shows “Setup network configuration successfully!”
It means the IP Network setting is successfully changed as figure 2.2-3.
Figure 2.2-3
☻Note: “Network Control” takes around 5-second to apply the new
network configuration. Please logon again with new IP address
after 5 seconds.