Chapter 5 peer to peer mode configuration, Environment used in this chapter, Network configuration – Welltech WG5260 V.6.1 User Manual
Page 41: Account manager, Interface configuration, H.323 configuration, Nvironment used in this chapter, Etwork, Onfiguration, Ccount
Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0
-
41
-
Chapter 5 Peer to Peer Mode Configuration
Environment used in this chapter
Process:
PSTN> H.323 Call: DNIS (822656991001) >DM (PSTN In Drop) >Make
H.323 - Peer to Peer Call (1001)
> SIP Call: DNIS (822656998888) >DM (PSTN In Drop) >Make SIP -
Peer to Peer Call (8888)
H.323> DNIS (50932123321)>DM (H.323_in_drop)>Make Call (0932123321)
SIP> DNIS (1130028610825123)>DM (SIP_in_drop)>Make Call
(0028610825123)
☺Digit Manipulation: Please refer to section “
Network Configuration
Account Manager
Interface Configuration
H.323 Configuration
Step 1: Change Register to Gatekeeper to “No” to enable peer to peer mode
as figure 5.1-1.
H323 VoIP
Network
Peer to Peer
H.323
Gateway
Phone 1001
SIP VoIP
Network
H323 Phone
SIP USB Phone
8888
SIP Phone