Welltech WG5260 V.6.1 - Manual (Page 53)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 53 -
• Max Length: The max length of the prefix
• Apply To: The trunk number that the prefix will apply to
T1/E1 Trunk Configuration
For each E1/T1 configuration can be set as the following:
Start Path: Configuration>Interface>Detail
Figure 7.2-5
Basic Parameter Description:
• Interface ID: System parameter
• Trunk ID: System parameter
• Trunk Type: T1or E1 selection
• Description: Description for this trunk ID
• Termin Side: Network site or User Site (normally, you set to “user site”
when connect to switch)
o
User Side
o
Network Side
• Trunk Mode: Trunk operation mode
o
Disable: Disable the trunk
o
Normal: Accept PSTN and VoIP calls
o
PSTN incoming only: Allow the PSTN incoming calls only
o
VOIP incoming only: Allow the VOIP incoming calls only
• Hunting Method: PSTN trunk hunting method for available channel
o
Random: Hunt randomly
o
Cyclic: Initial hunt (after power-up/reboot) begins with B channel 1;
subsequent hunts begin with position following last successfully
allocated resource
o
Rotary: Hunt always begins with B channel 1
o
Reverser Rotary: Hunt always begins with B channel 31
o
Reverser Cyclic: Initial hunt (after power-up/reboot) begins with B
channel 31, follows next available channel in reverser order
• CAS Variance: CAS counting variance