Welltech WG5260 V.6.1 - Manual (Page 49)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 49 -
o
Information: Show information, warring and critical message only
o
Debug: Show all debug messages
o
Full Trace: Show all status and debug messages
• First Response Timeout: The default maximum time to wait for
response. It’s depended on the network speed.
• No Answer Timeout: The default maximum time (in second) to wait the
remote party Answer (pick up phone).
• Ext. AAA Failure Opt: Bypass or disconnect incoming calls when external
RADIUS cannot be reached.
• Version: 6.1.0
• Data Base Number Select Mode: The Number Select Mode In Data Base
o
Enable System Log: Enable to send system information to syslogD
Server or not
• SyslogD Server IP 1, 2: syslogd server IP address
• Event Email Notice: The Email Notice For Event
• Email Event Filter Level: The Filter Level for Email Event
• SMTP Server: SMTP server host for email notice
• Email From: Email sender account
• Email To: Email receiver (semicolon is used for multiple receiver)
• Subject: Email subject to be send to receiver. The following variable
Click the Debug button to setup the debug level and module for tracing.
Figure 7.1-2
Parameter Description:
• Debug Level:
- Critical: Show critical error messages only
- Warring: Show warring and critical error message only
- Information: Show information, warring and critical message only
- Debug: Show all debug messages
- Full Trace: Show all status and debug messages
☻Note: Please contact Welltech for debug tracking. Otherwise, it might
hit the system performance when large load of debug.