Welltech WG5260 V.6.1 - Manual (Page 44)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 44 -
Parameter Description:
• Name: Name of the prefix
• Tel/Prefix: The matched prefix
• Trans Address: Peering Signaling Address
- H.323 Call: the address format is IP or IP:Q931Port e.g.
192.168.5.102 or 192.168.5.102:1720
- SIP Call: the address format is sip@IP, sip: telno@IP:port, sip:
telno@IP or sip: telno@DNS name
e.g. sip:[email protected], sip:[email protected]:5060,
sip:[email protected] or sip: 192.168.5.61
For SIP TCP address format is adding “tcp“in the regular SIP address.
An example is sip:[email protected]:5060;tcp.
• Use SIP Proxy: The Proxy ID set in SIP > Proxy.
• Priority: The priority for this entry
• Remove Prefix: Remove the matched prefix or not
• Add Prefix: Add the entered prefix
• DNIS DM Group: The DM group to be used after remove prefix and
add prefix.
• Working Time: Set the working time
• Working Day: Select the working day
• Allow No ANI: Allow no ANI (anonymous call) or not
Click the Option button to specify the stop hunting reason. Once the
system’s hunting result is one of the Stop Hunting Reason, the system will
stop the hunting.
Figure 5.3-5
☻Note: You must apply the change to take effect for the change.
Digit Manipulation
Please refer to section “ Digit Manipulation ”
Call Flow Editor
Please refer to section “ Call Flow Editor ”