Welltech WG5260 V.6.1 - Manual (Page 32)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 32 -
o
Check Parameter: Check parameter type (DNIS, ANI….)
o
Digit From: Start digit from
o
Digit To: End digit to
o
Valid To: If the checked variable is success to validate
o
Invalid To: If the checked variable is not success to validate
CIB: Call Information Branch
o
Info Type: Information type selection
ANI: Calling Number
DNIS: Called Number
IP: IP Address or network (e.g. 192.168.0.0)
PSTN: E1/T1 trunk and channel filter, format: interface id-
trunk id- trunk start- trunk stop
Prefix: The prefix to be match
0-1-17-31:
0: Interface ID (Always 0)
1: Trunk ID: 1
17: Start from B Channel 17
31: Stop from B Channel 31
o
Goto: The component to run next
o
Call Info Branch Line: ANI, DNIS, IP or PSTN goto setting
CIV: Call Information Validation, the user need setup the ACL for DNIS and
IP to take effect
o
Info Type: The info type to be validation
-DNIS: Called number
-ANI: Calling number
-IP: In coming IP address
-User: User ID
o
Allow To: If it is met the ACL defined
o
Disallow To: If it is not met the ACL defined