Welltech WG5260 V.6.1 - Manual (Page 21)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 21 -
T1/E1 Trunk Configuration
This section is going to setup the PSTN trunk parameters.
Step 1: Select the installed interface to modify the trunk parameter by click
Detail button as figure 3.2-1.
Figure 3.2-1
Step 2: Select the trunk to be modified and click Modify button as figure 3.2-2.
Figure 3.2-2
Step 3: Modify the trunk parameters (i.e. Trunk Type, Termin Side, Trunk
Mode, Protocol Tag, and Line Code) and apply the change by clicking
Apply as figure 3.2-3.
Figure 3.2-3