Welltech WG5260 V.6.1 - Manual (Page 52)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 52 -
• Active T.38 when open channel: Default is disable. It is used when
some remote gateway T.38 doesn’t compatible only.
• PSTN show Display Name: Send Display IE to ISDN or not
• SIP show Display Name: Send ISDN Display IE to become SIP Display
name or not.
• DTMF Volume: The DTMF relay volume (0: -32 DB, 32: 0db, 64: +32db)
Dial Plan Configuration
Dial Plan can be used to assign the ISDN number plan based on prefix
setting. The dial plan will overwrite the trunk’s default dial plan number.
Start Path: Configuration>Interface>Dial Plan
Figure 7.2-3
Basic Parameter Description:
• Prefix: Called party number prefix
• Src Num Plan: ISDN Source number plan
• Src Num Type: ISDN Source number type
• Dest Num Plan: ISDN destination number plan
• Dest Num Type: ISDN destination number type
• Apply To: Trunks apply to
Overlap Configuration
The administrator can configure ISDN overlapping sending dialing plan here
to speed up the user dialing. The longest prefix will be matched. Display as
figure 7.2-4.
Figure 7.2-4
Parameter Description:
• Prefix: The prefix that the dial plan matched