beautypg.com

9 diagnostics, 1 module identification parameters, 1 sm-ethercat module id code – Emerson SM-ETHERCAT 0471-0128-02 User Manual

Page 56: 2 sm-ethercat firmware version, Diagnostics, 1 module, Identification, Parameters, Gno sti, Stics

background image

56

SM-EtherCAT User Guide

www.controltechniques.com

Issue Number: 2

9

Diagnostics

9.1

Module identification parameters

The basic menu parameters can be accessed through the slot menu in the drive,
Pr MM.PP, where MM is the menu for SM-EtherCAT in the host drive. The basic menu
parameters may also be accessed using menu 60, i.e. Pr 60.PP.

9.1.1

SM-EtherCAT module ID code

The module ID code indicates the type of module installed in the slot corresponding to
menu MM. This is useful for checking the module is of the correct type.

9.1.2

SM-EtherCAT firmware version

Unidrive SP/ Unidrive SPM/ Mentor MP
The software version of the Solutions Modules can be identified by looking at Pr 15.02 /
Pr 16.02 or Pr 17.02 and Pr 15.51 / Pr 16.51 or Pr 17.51.
Menu 15,16 or 17 is Solutions Module slot dependent with menu 17 being the lowest
position nearest the control terminal connections.

The software version takes the form of xx.yy.zz, where Pr 15.02 displays xx.yy and
Pr 15.51 displays zz (e.g. for software version 01.01.00 on a module in the middle Solu-
tions Module slot, Pr 16.02 will display 1.01 and Pr 16.51 will display 0).

Digitax ST / Unidrive ES / Affinity
The software version of the Solutions Modules can be identified by looking at Pr 15.02 or
Pr 16.02 and Pr 15.51 or Pr 16.51.

Menu 15 or 16 is Solutions Module slot dependent with menu 15 being the position
nearest the control terminal connections.

The software version takes the form of xx.yy.zz, where Pr 15.02 displays xx.yy and
Pr 15.51 displays zz (e.g. for software version 01.01.00 on a module in the middle Solu-
tions Module slot, Pr 16.02 will display 1.01 and Pr 16.51 will display 0).

Table 9.1 SM-EtherCAT module ID code

SM-EtherCAT module ID code

Pr MM.01

Default

421 (SM-EtherCAT)

Range

-

Access

RO

Table 9.2 SM-EtherCAT firmware - major version

SM-EtherCAT firmware - major version (xx.yy)

Pr MM.02

Default

N/A

Range

00.00 to 99.99

Access

RO

Table 9.3 SM-EtherCAT firmware - minor version

SM-EtherCAT firmware - minor version (zz)

Pr MM.51

Default

N/A

Range

0 to 99

Access

RO