When problems occur, No power, Cannot print – Visara 5350 User Manual
Page 68: When problems occur 3-2, No power 3-2, Cannot print 3-2, No power cannot print
Nov 06
3-2
35PPM Laser Printer User Guide
No Power
When Problems Occur
When problems occur while using the printer, search for the corresponding item from the follow-
ing list of problems to carry out the appropriate action for the problem.
No Power
Cannot Print
Status
Items to check
Action
There is no power.
Is the power switched off?
Press the printer switch to the position to
turn the power on.
See “Turning the Printer On“on page 1-18.
Is the power cord disconnected or not
securely connected?
Switch off the power and connect the cord to
the power outlet and printer again. Then,
switch on the power.
See “Connecting the Power Cord“on page
1-17.
Is the power cord connected to a power
outlet with the correct voltage?
Connect the printer exclusively to an outlet
with a suitable voltage rating and current
rating.
Safety Notes
Power is interrupted
frequently.
Printer may have malfunctioned.
Switch off the power to the printer, remove
the plug from the power outlet and contact
our Printer Support Desk.
Is the power cord disconnected or not
securely connected?
Switch off the power and connect the cord to
the power outlet and printer again. Then,
switch on the power.
See “Connecting the Power Cord“on page
1-17.
Status
Items to check
Action
Print instruction was sent but
processing did not start.
Is the fault indicator lit?
Is the fault indicator blinking?
Is the print-ready indicator off?
Carry out the action according to
the status of the indicator.
Is there any message displayed on
the control panel?
Check the message, then carry out
the action.
Is there any message displayed in
the computer?
Check the message, then carry out
the action.