Visara 5350 User Manual
Page 114
Nov 06
5-20
35PPM Laser Printer User Guide
Feed Roll
4.
While pushing down the shaft of the feed roll as shown in the diagram, widen the tab on the
feed roll to loosen it (1) and then slowly remove the feed roll from the shaft of the paper tray
(2).
5.
Hold the tab on the new feed roll as shown in the diagram and slowly push it into the shaft
on the paper tray.
By aligning the small tabs on the feed roll with the slots of the shaft, push the feed roll com-
pletely in so that the tab fits into the slot.
Tab