Visara CCA-3074 Planning Guide - Manual (Page 55)

CCA-3074 Planning
707159-002 4-11
IO Definitions:
RESOURCE PARTITION=((CSS(0),(LPAR390,1),(TEST1,2)),(CSS(1), (LPAR390B,3),(TEST2,4)))
CHPID PATH=(CSS(0),1F),PARTITION=((LPAR390,TEST1)),SWITCH=04,TYPE=FC,PCHID=1C0,SHARED
CHPID PATH=(CSS(1),43),PARTITION=((LPAR390B,TEST2)),SWITCH=04,TYPE=FC,PCHID=145, *
SHARED
CNTLUNIT CUNUMBR=1E00,PATH=(CSS(0),1F),UNITADD=(00,5),UNIT=NOCHECK,CUADD=0, *
LINK=(CSS(0),C4)
IODEVICE CUNUMBR=IE00,ADDRESS=(600,5),UNIT=3270-X,UNITADD=00,PARTITION=(CSS(0),TEST1)
CNTLUNIT CUNUMBR=1F00,PATH=(CSS(0),1F),UNITADD=(00,5),UNIT=NOCHECK,CUADD=1, *
LINK=(CSS(0),C4)
IODEVICE CUNUMBR=1F00,ADDRESS=(1200,5),UNIT=3270-X,UNITADD=00, *
PARTITION=(CSS(0),LPAR390)
CNTLUNIT CUNUMBR=1195,PATH=(CSS(1),43),UNITADD=(00,5),UNIT=NOCHECK,CUADD=5, *
LINK=(CSS(1),C4)
IODEVICE CUNUMBR=1195,ADDRESS=(1E00,5),UNIT=3270-X,UNITADD=00,PARTITION=(CSS(1),TEST2)
CNTLUNIT CUNUMBR=2144,PATH=(CSS(1),43),UNITADD=(00,5),UNIT=NOCHECK,CUADD=1, *
LINK=(CSS(1),C4)
IODEVICE CUNUMBR=2144,ADDRESS=(700,5),UNIT=3270-X,UNITADD=00,PARTITION=(CSS(1), *
LPAR390B)
Notes:
1. CHPID TYPE=FC is used for FICON as compared to the
TYPE=CNC used for ESCON.
2. For FICON you must use UNIT=NOCHECK in the
CNTLUNIT macros in place of the UNIT=3174 used in the
ESCON environment.